84 lines
4.3 KiB
Plaintext
84 lines
4.3 KiB
Plaintext
$FG,5$$TX+CX,"Booting A PC"$$FG$
|
||
|
||
$WW,1$When you turn-on (better term is "power-up"!) a computer or do a hardware rst, it starts in the $FG,2$BIOS$FG$. Sometimes, you must change the $FG,2$BIOS$FG$ boot order to boot stuff.
|
||
|
||
The $FG,2$BIOS$FG$ loads a boot sect from CD-ROM or hard disk or whatever. The boot sect runs in 16-bit mode and often loads-in a second file that's bigger if it can't be done by just one sect. It's a safe bet that boot sects are hand-coded assembly language Most boot sects use the $FG,2$BIOS$FG$ to load-in the rest.
|
||
|
||
Not only do boot sects have a size limit, 512 bytes or 2048 bytes for CD-ROM, the files they load have to fit within 640K because they run in 16-bit mode. This means they usually can't just load the whole operating system and start it running. I guess some boot loaders, like $LK,"Grub","FI:::/SparrowOS/Doc/Grub.TXT.Z"$, have a capability of switching modes before handing-off ctrl to the operating system. Anyway, the operating system must load the rest of itself. My $LK,"OSMain","FI:::/SparrowOS/OSMain/OSStart.CPP.Z"$ module is what the boot sect loads and I try to put a minimum in it so that it will always fit in 640K. It switches to 32-bit mode, then, to 64-bit mode allowing access to more memory. It loads in the rest of SparrowOS.
|
||
|
||
All the boot related stuff for SparrowOS is in the $FG,2$/SparrowOS/Adam/Boot$FG$ directory.
|
||
|
||
$LK,"InsBoot.CPP.Z","FI:::/SparrowOS/Adam/Boot/InsBoot.CPP.Z"$ Installs and patches boot sects
|
||
$LK,"BootCD.CPP.Z","FI:::/SparrowOS/Adam/Boot/BootCD.CPP.Z"$ CD-ROM Boot sect
|
||
$LK,"BootMHD.CPP.Z","FI:::/SparrowOS/Adam/Boot/BootMHD.CPP.Z"$ Master HD boot record
|
||
$LK,"BootMHD2.CPP.Z","FI:::/SparrowOS/Adam/Boot/BootMHD2.CPP.Z"$ Stage 2 master boot loader
|
||
$LK,"BootHD.CPP.Z","FI:::/SparrowOS/Adam/Boot/BootHD.CPP.Z"$ HD partition boot record
|
||
|
||
$FG,2$BootCD$FG$ is the CD-ROM boot sect. If you are curious on the layout of $FG,2$ISO9660$FG$ CD-ROMs, see $LK,"DiskCDDVD.CPP.Z","FI:::/SparrowOS/Adam/Dsk/DskCDDVD.CPP.Z"$. To make a custom bootable CD-ROM, look here $LK,"Bootable CD","FF:::/SparrowOS/Doc/FileMgr.TXT.Z,BurnProdu"$.
|
||
|
||
$FG,2$BootMHD$FG$ is the master boot record for a hard drive. This goes on block zero. It loads-in $FG,2$BootMHD2$FG$ which is stored as a file on a partition, kinda risky and unusual -- most other master boot loaders place stage 2 in a gap that's not in any particular partition. $FG,2$BootMHD2$FG$ displays a menu and will boot a partition. Each partition has it's own partition boot record, the first block of the partition. $FG,2$BootHD$FG$ is the boot record for a SparrowOS partition.
|
||
|
||
My boot records don't access directories because that would make them too big for one block and would make them depend on a file system layout. Instead, they get patched with the LBA, logical block addresses, to load other stuff. To update with a new SparrowOS kernel ($FG,2$OSMain$FG$), you must create a binary file and patch the boot loader so it knows the LBA blocks to load. Therefore, you usually recompile the kernel and update the boot sect at the same time. $LK,"InstallBoot","MN:InstallBoot"$() does this. $LK,"InstallMasterBoot","MN:InstallMasterBoot"$() will install a master boot loader.
|
||
|
||
With SparrowOS , the $FG,2$OSMain$FG$ module loads the $FG,2$Compiler$FG$ module so it can process start-up scripts and works with srource code from then on. $LK,"::/SparrowOS/OSMain/Adam1.CPP.Z","FI:::/SparrowOS/OSMain/Adam1.CPP.Z"$ is the starting start-up script. It processes (compiles into memory) the stuff in the $FG,2$/SparrowOS/Adam$FG$ directory and ends by $FG,2$#include$FG$ing the $LK,"HOME/Adam3.CPP.Z","FI:HOME/Adam3.CPP.Z"$ file.
|
||
|
||
It is possible to reboot without doing a hardware rst. This is faster. You might do this when working on $FG,2$OSMain$FG$ or your start-up scripts when you want them to take effect. See $LK,"Boot","MN:Boot"$().
|
||
|
||
$SP,"",1$
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Þ è LoseThos MBR Ð @ LoseThos MBR part 2 ˜ OSMain Ð è /LT/OSMain/Adam1.APZ Ø /LT/Adam/Adam2.APZ Ø @ HOME/Adam3.APZ ° ˜ HOME/DoIt.CPZ ` ˜ ` LoseThos CD-ROM BootLoader ¸ x LoseThos Partition BootBlock ! @ ! L t ! € � !D L D ’ !è L è � !` ˜ ü ˜ ! ˜ 0 ˜ ! ä ! ô ! < ˜ � à œ Boot() Soft boot |